Kraftmaid Kitchen Cabinets Reviews

Semi Custom Kraftmaid Kitchen Cabinets

KidKraft Retro Kitchen And Refrigerator | Shopping   The ...

Kidkraft Vintage Kitchen Is Awesome

August 30, 2019 Kitchen Design Ideas

How To Replace a Kitchen Faucet Step by Step

How to replace a kitchen faucet can be done by following these steps. First thing you have to do before starting the process is pick up key parts at the hardware store. What you need are shutoff valves, supply tubes, and basin wrench. It is better for you to take a look under the sink and make sure that there are shutoff valves feeding the faucet, before applying the steps of how to replace a kitchen faucet. Add them, if there are not. If there are shutoff valves, turn on the hot and cold water to confirm that they are in working order, then shut off the valves. You should install the new ones if the faucet still drips. That is why, you should prepare the shutoff valves before you start to replace a kitchen faucet.

After that, measure the supply tube that exists and purchase some new stainless steel-sleeved supply tubes. The rupture free service will be given for years and without kinking, they can be routed around obstacles. Last, the basin wrench is needed to remove and install the hard-to-reach fasteners that clamp older faucet assemblies the sink. If you have already collect those things, now it’s time to replace the kitchen faucet. Start with turning off the hot and cold water. Then, open the faucet up to relieve the pressure. Disconnect both of water lines from the faucet by using an adjustable wrench and a pair of channel locking pliers.

Continue by removing the nut holding the faucet tailpiece assembly in place by using a basin wrench. If your sink has the line that connects the hose to faucet, disconnect it. After that pull the old faucet and start to clean the sink’s surface. You can continue by measuring the distance and make sure that the new faucet will fit the holes. Then, seal the new faucet. Thread on the flange and nut with a socket wrench underneath the sink. After that the supply lines can be attached to the faucet and then to the shutoff valves. Connect the hot water on the left and on the right for the cold water. Now you can turn on the water by following the steps of how to replace a kitchen faucet.

Comments are closed.