Bolster Pillows Instructions Design

Bed Bolster Pillows

Bolster pillows – Design of bolster pillows instructions to make it look beautiful and attractive, For example, the length is 20 inches, and the circumference is 8 inches, the dimensions of the fabric piece that is necessary for the cover, is 30 inches by 10 inches. Cut a piece of fabric similar to that measurement. Hem the two shorter ends of the fabric by folding the edge of the fabric under a half inch, Using a straight or a decorative stitch, sew stitch 5/8 inch from the outer edge. Sew lace or trim, if desired.

Sew the long edge strength bolster pillows cover by folding it in half lengthwise, and stitching down the long edge, 5/8 inch from the raw edge, with a straight stitch. Attach the raw edge of the frayed by then zigzag stitch along the raw edge.

Make tape to ensure strength of the cover bolster pillows shape by cutting two lengths of tape to the desired length. Hem both raw end of the tape using the same method as edging the two short ends of strength pillowcase to bolster pillows. Insert bolster pillows form in the strength pillowcase. Assemble both ends of the cover, and tie them securely with the enclosed ribbon.

Related Posts